This is how we do it. Sanding, that is.

Oh god, I’m *so* over sanding. Still, the body is done, now on to the doors.

Lovely sprayed-on polyester filler.

Sand it back until the door’s shortcomings become evident.

I’m trying not to cut back to the metal underneath, honest.

A strip of masking tape helps to keep the beltline crease straight. At least, that’s the theory.

 

I’ve sanded the door to as straight as I can, but there are a few spots that are still too low. Apply polyester filler. Sand it off. Repeat.

I’m *so* over sanding.